Minnesota Vinyl Siding and Accessories - Feel free To Contact Us - There Are Several Vinyl Siding Contractors in Minnesota Give Royalty Remodelers A Chance To Earn Your Business - We Can Offer You Some Of  The Best Prices On Vinyl Siding & Installation In Minnesota.

Vinyl Lap Siding Soffit Panel J - Channel And Trim  Mounting Blocks Intake & Exhaust Vents
Roofing And Remodeling Home Page
Vinyl Siding
Alcoa Vinyl Siding
Amcraft Vinyl Siding
Arrowhead / Edco
Vinyl Siding / Accessories
Siding Home Page
Vinyl Siding Info Page
Vinyl Lap Siding Styles
Soffit Panel
J - Channel And Trim
 Siding Mounting Blocks
Intake And Exhaust Vents
Roofing
Minneapolis Roofing Roofing Info
Asphalt Roofing Shingles Info / Specs
Metal And Steel Roofing
Roofing Hail Damage
Minnesota  Roofing Codes / Questions
Pictures of Minneapolis Roofing Jobs
Roofing Prices
Local MN Roofing Prices
Shingle prices materials
Roofing Installation Prices Labor Only
Ice Dams / Insulation
Attic & Insulation Article Common Problems
Roofing Ice Dams / Pictures Explanation
Contractor and Supplier Directory
Local Minnesota Roofing Contractors / Directory
Gaf Materials Corporation
Owens Corning Shingles
National Roofing Contractors Association
Building / Roofing Suppliers In Minnesota
Our Other Services
Replacement Windows And Doors
The Gutter Stuff Prices / Leaf  Guards
Cedar Decks & Porch Installation
Royalty Remodelers Contact Info
*Free Estimate Contact Us*

 

 

Vinyl Siding Accessories

Soffit Paneling (for the eaves)

What is soffit? Illustrated in the diagram to the left it is the underside of the overhang. We typically use the same trim color as your fascia for this portion of your home.

Below are samples of the different venting styles of soffit panel we recommend using one or the other since this is a crucial part of your roof ventilation system normally the intake. And would strongly discourage the use of a non venting soffit

We generally use aluminum soffit panel but there is a vinyl soffit panel as well

 10" Wide Vented Soffit Panels- (200 Sq. Ft./ 20 panels per box- 12' Length)

12" Wide Center-Vented Soffit Panels– White Only (192 Sq. Ft./ 16 panels per box-12' Length)

Back To Top Of Page

J - Channel And Trim

Siding Trim  (please scroll down the page)
Inside Corner Post

 The inside corner post is used for inside corners. Provides a channel for the siding to fit into -1 3/8" Inside Corner Post- 10' Length (240 ft./ 24 pcs. per box)

Outside Corner Post

Obviously for outside corners - 3" Vinyl Outside Corner Post- 10' Length- (100 ft./ 10 pcs per box)

J-Channel

This is Used for trim around windows doors etc.. it provides a channel for the siding to but up against or fit into. - 5/8" Flexible Vinyl J-Channel– 12' Length- (216 ft./18 pcs per box)

  Starter Strip

 This Strip is used to start the first row of you siding it must be level and should be put on your home all the way around prior to installing any siding. It provides a lock for the first row of siding - *10' Length (500 ft./50 pcs. per box)

 Vinyl Under - Sill Trim

This is Used to hold your vinyl siding in place under windows, top row of siding, and hard to get to areas. Provides a lock for top row of siding. 12' Length- (288 ft./24 pcs per box)

 F-Trim - Soffit Channel

 Generally this used to hold your soffit panel on the wall side - 12' Length (336 ft./28 pcs. per box) *White and Most Colors

Back To Top

Mounts (please scroll down the page)
Vinyl Mini-Mount for Exterior

(For flush mounting short wire electrical outlets and water spigots- 5.125" x 6.875")

 

Vinyl Mini-Mount for Exterior Receptacle

 

(For flush mounting short wire electrical outlets- 5" x 6 ¾")

Vinyl Mount Master for Exterior Light Fixture

(For mounting exterior fixtures on vinyl or aluminum side wall or soffit where a low profile is desired- 5 ½" x 6 ½")

Vinyl Mount Master for Exterior Light Fixture

(For mounting exterior fixtures on vinyl or aluminum side wall or soffits where a low profile is desired- 7 1/4" x 8")

Back To Top

Vent Covers
Vent Kit Cover for Vinyl Siding-  5.5625" x 5.625"

*Comes with two separate detachable covers and aluminum insert tube. Intake pictured on left exhaust pictured on right.

Back To Top